Vous êtes ici : start » wiki » flyingwingv2

Différences

Ci-dessous, les différences entre deux révisions de la page.

--- wiki:flyingwingv2 [2017/05/21 00:24] – [Plans] leden
+++ wiki:flyingwingv2 [2017/05/21 17:47] (Version actuelle) – [Matériel] leden
@@ Ligne 10: / Ligne 10: @@
 - ESC: Racerstar RS20A Lites 20A Blheli 2-4S [[https://goo.gl/S5Sl8O|Banggood]]\\
 - Servos : MG90S Metal Gear RC Micro Servo [[https://goo.gl/Z2oHPh|Banggood]]\\
-- Batterie : ZIPPY Compact 1300mAh 3S 25C ou 850mAh [[http://hobbyking.com/en_us/zippy-compact-1300mah-3s-25c-lipo-pack.html?p=7G14111777398201506Z|Hobbyking]]\\
+- Batterie : ZIPPY Compact 1300mAh 3S 25C ou 850mAh 1300mAh 3S 25C ou 850mAh [[http://hobbyking.com/en_us/zippy-compact-1300mah-3s-25c-lipo-pack.html?p=7G14111777398201506Z|Hobbyking]]\\
 - Connectors: XT60 [[https://fpvracing.ch/en/components/119-xt60-male-female-bullet-connectors-plugs-for-rc-battery.html|FPVRacing.ch]] or XT30 [[https://goo.gl/wYKCZg|Banggood]]\\
 - Propellers: 5×4.5×3 5045 [[https://goo.gl/evZtil|Banggood]]\\
@@ Ligne 28: / Ligne 28: @@
 - Metal Push Rods : [[https://goo.gl/JalWcr|AliExpress]]\\
 - Laminate film: CP laminating film - 1.7 Mil [[http://alofthobbies.com/new-stuff-laminating-films.html|Aloft Hobbies]]\\
-- Heat Shrink Tube [[https://goo.gl/kulUAh|FPVRacing.ch]]
+- Heat Shrink Tube [[https://goo.gl/kulUAh|FPVRacing.ch]]\\
+- Hex socket screw M3x5 (for the motor mount)\\
+- Claw nut M3 (for the motor mount)
 TOOLS

Piste :