===== Aile volante V2 (2017) =====

Documents et sources en complément de l'atelier aile volante 2017{{  http://ateliers.fablab-lacote.ch/Files/6/93000/93003/ProductPhotos/Large/395317807.jpg?nolink&400x300}}

===== Matériel =====

ELECTRONIQUE :

- Motor: SunnyskyX2204S 2300kV Generation II [[http://fpvracing.ch/en/motors/149-sunnysky-x2204s-2300kv-generation-ii.html|FPVRacing.ch]]\\
- ESC: Racerstar RS20A Lites 20A Blheli 2-4S [[https://goo.gl/S5Sl8O|Banggood]]\\
- Servos : MG90S Metal Gear RC Micro Servo [[https://goo.gl/Z2oHPh|Banggood]]\\
- Batterie : ZIPPY Compact 1300mAh 3S 25C ou 850mAh 1300mAh 3S 25C ou 850mAh [[http://hobbyking.com/en_us/zippy-compact-1300mah-3s-25c-lipo-pack.html?p=7G14111777398201506Z|Hobbyking]]\\
- Connectors: XT60 [[https://fpvracing.ch/en/components/119-xt60-male-female-bullet-connectors-plugs-for-rc-battery.html|FPVRacing.ch]] or XT30 [[https://goo.gl/wYKCZg|Banggood]]\\
- Propellers: 5×4.5×3 5045 [[https://goo.gl/evZtil|Banggood]]\\
- BEC Diatone 5V 2A: [[https://goo.gl/TWqGYi|Banggood]]\\
- LED Diatone DT-LED-901: [[https://goo.gl/SVJ23P|Banggood]]\\
- 26 AWG cables: [[https://fpvracing.ch/en/components/156-1m-silicone-wire-26awg-red-black.html|FPVRacing.ch]]\\
- Battery Voltage Tester: [[https://www.banggood.com/Wholesale-1S-8S-Li-po-Battery-Voltage-Tester-Checker-Indicator-Monitor-Buzzer-Alarm-p-26049.html?p=7G14111777398201506Z|Banggood]]

FRAME :

- Foam DEPRON l.1000 x L.1000 mm, Ep.6 mm [[https://www.leroymerlin.fr/|Leroy Merlin]]\\
- Foam EPP Ep.6 mm [[https://goo.gl/7qwpDk|Hebu]]\\
- Elevon : Balsa 3mm [[https://produkte.migros.ch/sortiment/do-it-garden|Migros]]\\
- Winglets: polypropylène expansé 3mm\\
- Motor mount : 2mm plywood [[https://goo.gl/kuji0d|Coop]]\\
- Control horns & clevis: [[https://goo.gl/zf79uc|Banggood]]\\
- Metal Push Rods : [[https://goo.gl/JalWcr|AliExpress]]\\
- Laminate film: CP laminating film - 1.7 Mil [[http://alofthobbies.com/new-stuff-laminating-films.html|Aloft Hobbies]]\\
- Heat Shrink Tube [[https://goo.gl/kulUAh|FPVRacing.ch]]\\
- Hex socket screw M3x5 (for the motor mount)\\
- Claw nut M3 (for the motor mount)

TOOLS

- Razor blade\\
- Sandpaper : 120\\
- Tape with fiberglass, 25 mm [[https://www.swiss-composite.ch/|Swiss Composite]]\\
- Tape with fiberglass, 35 mm [[https://www.swiss-composite.ch/|Swiss Composite]]\\
- Tape with fiberglass, 50 mm [[https://www.swiss-composite.ch/|Swiss Composite]]\\
- Glue UHU POR: colle de contact, couvrir les 2 parties à coller et laisser sécher 10 min avant l’assemblage, presser fortement\\
- CA (cyanoacrylate) : utiliser de la « thick », en mettre très peu (pour le poids et pour ne pas abimer la mousse). Accélérateur facultatif.

- Hot glue gun [[https://goo.gl/d7Nkqh|Banggood]]\\
- Glue gun sticks: [[https://goo.gl/9TVMrZ|Banggood]]\\
- Fer a souder: [[https://goo.gl/X4HfRp|Aliexpress]]\\
- Electric Heat Shrink Gun [[https://www.banggood.com/220V-300W-DIY-Electric-Heat-Shrink-Gun-Power-Tool-Hot-Air-Temperature-Gun-with-Supporting-Seat-Plastic-FIMO-p-1025199.html?p=7G14111777398201506Z|Banggood]]\\
- Servo tester [[https://goo.gl/BZoXaA|Banggood]]

DIVERS :

- Poche de protection pour batteries [[https://fpvracing.ch/en/transport-/962-lipo-safe-bag-230x290-mm.html|FPVRacing.ch]]\\
- Battery charger [[https://goo.gl/gxVki8|FPVRacing.ch]]\\
- Wrench for Lock Nut: [[https://fpvracing.ch/en/motors/898-wrench-for-lock-nut.html|FPVRacing.ch]]\\
- Lock Nut for motor CCW [[https://fpvracing.ch/en/motors/898-wrench-for-lock-nut.html|FPVRacing.ch]]\\
- Lock Nut for motor CW [[https://fpvracing.ch/en/motors/898-wrench-for-lock-nut.html|FPVRacing.ch]]\\
- Racerstar USB Linker Programmer [[https://goo.gl/nNAZt8|Banggood]]


===== 3D printed parts =====

- LED holder\\
- Air duct

===== Plans =====

Plan originaux realisé par [[http://flitetest.com/|Flite Test ]]\\
Designed By: Josh Bixler Drawing By: Dan Sponholz

Download les liens originaux: [[http://www.stonekap.net/ftplans/FT Mini Arrow v1.1 Full-Size.pdf|pdf]]

Plan Modifié (BN 2017 AVR v4.1) [[http://ifly4u.ch/category/download/|ifly4u.ch]]


===== Trucs et astuces =====

MONTAGE

VOL

- Toujours lancer et atterrir contre le vent\\
- N'oublier pas qu’en tournant votre aile à moins de portance, si votre vitesse est trop réduite elle va décrocher (passer du mode vole au mode je tombe comme une pierre)\\
- N'hésiter pas à la faire planer : couper le moteur, et voler: L’aile est moins stable à faible vitesse mais cela ne fera que renforcer votre expérience utilisateur.

RADIO

FrSky ACCST TARANIS X9D PLUS [[https://goo.gl/pSCcLI|FPVRacing]]\\
Flysky FS-i6X 2.4GHz [[https://goo.gl/ePDruo|Banggood]]

VIDEO

Connecter la radio avec le receiver: [[https://youtu.be/e4u_dEKP5Rs|https://youtu.be/e4u_dEKP5Rs]]\\
Synchronisation (Binding) Taranis 9XD Plus avec receiver D4RII: [[https://youtu.be/cD_xLRIt5N0|https://youtu.be/cD_xLRIt5N0]]


===== Liens Youtube =====

[[https://www.youtube.com/channel/UCsKONpvCpJdgVJXh-hqVscg|FabLab La cote]]\\
[[https://www.youtube.com/user/flitetest|FliteTest]]\\
[[https://www.youtube.com/user/Painless360|Painless360]]\\
[[https://www.youtube.com/user/andyandvirg|Andrew Newton]]\\
[[https://www.youtube.com/user/RCModelReviews|RCModelReviews]]\\